View Articles by Category

There are no sub categories
Add an article to this category

Category » Capri S2 Preamplifierrss button

(Page 1 of 2)      Prev | 1 | 2 | Next

There were 29 articles found in this category:

  1. question2013 Product Brochures
    2013 - Product Brochures available for download below.
  2. questionCurrent Product Reviews
    Model 825 Stereo Power Amplifier Audiotechnique #385 - October 2013 - by Winson Ng Model 725 Monoblock Power Amplifier theaudiobeat.com - September 2013 - by Roy Gregory hifi-advice.com - August 2013 - by Christiaan Punter The Absolute Sound #228 - December 2012 - by Robert Harley Model 625 Ste ...
  3. questionCapri S2 Phono Card Settings
    If the Phono Card option has been factory installed, so that INPUT 1 on the rear of the Capri S2 Preamplifier is dedicated for phono operation only, the following adjustments can be made to optimize the performance of a particular phono cartridge. These adjustments include both cartridge loading ...
  4. questionCapri S2 Review - hifi & records magazine - 2013 (Germany)
    Full review attached as PDF file below:
  5. questionModel 525 Review - hifi & records magazine - 2013 (Germany)
    Full review attached as PDF file below:
  6. questionCapri S2 Preamplifier Features and Specifications
    With its unprecedented sonic performance and functional enhancements, the new Capri Series 2 preamplifier offers stunning dynamic realism and expressive refinement through an advanced topology. The Capri S2 features an impressive complement of standard input/output interfaces; greatly enhanced f ...
  7. questionHow can I turn on/off the Capri S2 theater bypass mode?
    Unplug the Capri S2 Preamplifier power cable from the wall AC outlet. Place the unit upside-down on a soft, clean surface. Using a 5/64" hex wrench, remove the nine screws that secure the bottom cover of the unit. Locate jumper position (see figure below). For display dimming move jumper between ...
  8. questionHow can I turn on/off Capri S2's auto dimming display feature?
    The Capri S2’s luminescent display can be configured to turn itself off automatically 5 seconds after each button on the front panel or on the remote control is pressed. This requires a change to an internal jumper setting. Unplug the Capri S2 Preamplifier power cable from the wall AC outl ...
  9. questionCapri S2 Front Panel
    (1) INPUT INDICATORS: Inputs 1 through 4 have a small indicator light below the Input Selector Buttons. An indicator will illuminate green when selected to show that the input is currently active. (2) INPUT SELECTOR BUTTONS: Pressing these buttons selects an input source (CD, tuner, phono, etc ...
  10. questionCapri S2 Rear Panel Connections
    The Capri S2 Preamplifier offers excellent compatibility with associated audio and A/V components. When connecting or disconnecting interconnect cables, the preamplifier should be placed in Mute Mode (red MUTE indicator LED on the front panel ON). (1) UNBALANCED INPUTS: If you are using unbal ...
  11. questionShould I use custom power cables or power conditioners with the Capri S2?
    AC power conditioners and custom AC mains power cables are a common accessory in many high performance audio and video systems and can be used to improve the quality of music reproduction in certain instances. We have supplied the best possible basic power cord with the Capri S2 Preamplifier; ho ...
  12. questionCapri S2 Remote Transmitter Battery Replacement
    When the remote begins to become weak or will not function, it is likely necessary to replace the battery. Access to the battery is gained by removing the back cover of the remote transmitter unit. The old batteries can be removed from the snap-on battery terminals and new batteries reinstalled. ...
  13. questionCan the Capri S2 be used for bi-amping?
    Yes. Two sets of preamplifier outputs, both RCA and XLR connector types, provide equal and isolated line-level outputs for system configurations such as loudspeaker bi-amping.
  14. questionWhat are the new features of the Capri S2 remote?
    The handheld remote has also been re-designed to control all preamplifier functions. The new functional features include display dimming and turn-off, display of channel balance, and control of absolute phase from the handheld remote.
  15. questionCapri S2 Optional Phono Card and DAC Cards
    Internal headers are provided on the Capri S2 circuit board which allow the user to install an optional Phono card or Digital to Analog Convertor card which convert the line-level INPUT 1 RCA inputs to either Phono or DAC inputs respectively. The Phono Card is adjustable, via jumper placement, f ...
  16. questionCapri S2 Signal Circuitry
    The new Capri S2 internal signal circuitry incorporates the latest precision low distortion operational amplifiers powered by ultra low-noise voltage regulators utilizing small geometry SMD components. All resistors are low noise, 0.1% thin-film type for extremely low thermal noise which complem ...
  17. questionCapri S2 I/O Design
    All signal inputs are buffered and interfaced to the signal circuitry with Lundahl audio transformers configured for voltage step-down which minimizes source loading and interactions while providing superior RF and EMI immunity. Other benefits include ground noise isolation and excellent common ...
  18. questionDo I need to change the Capri S2 from 110V to 240V operations before connecting it to a PC-1?
    There is no need to change voltage on Capri S2 before connecting it to a Rowland PC-1 external rectifier. Capri S2 can operate on any AC mains voltage from 85V to 265V, and from 50Hz to 60Hz without any internal adjustments. Therefore, the Capri S2 preamplifier can be safely connected to a PC-1 ...
  19. questionIs the Capri S2 preamplifier compatible with the PC-1 PFC rectifier?
    Yes, the Capri S2 preamplifier can be safely connected to a PC-1 power rectifier and conditioner, regardless of local AC mains voltage. Capri S2 is equipped with auto-ranging circuitry, and dual-stage voltage regulation, compatible with AC mains voltages ranging from 85 to 265 VAC, and AC frequ ...
  20. questionIs Capri S2 compatible with tube power amplifiers as well as solid state (SS) power amplifiers?
    Yes, with its incredibly low output impedance of only 80 Ohm balanced, and 40 Ohms in single ended operations, the Capri S2 preamplifier is compatible with most solid state and tube-based power amplifiers on the market today. Compatible power amplifiers can have input impedances as low as 1000 O ...
(Page 1 of 2)      Prev | 1 | 2 | Next